Lining Systems
Geotex NZ® Ltd provides range of non-construction grade Geosynthetic Clay Liners. SwellSeal® LS, is manufactured from high quality Bentonite to meet international standards. It has been used in major projects in China, Italy, Czech Republic, South America and Australia.
The Bentonite Clay Liner is made by distributing a uniform layer of granular sodium Bentonite between two high strength geotextiles. Using fine American needles, fibres from the upper non-woven geotextile are randomly needlepunched through the layer of Bentonite and into the sulzer woven polypropylene geotextile. This process results in an
even waterproof layer and a strong mechanical bond between the fabrics.
Applications:
SwellSeal® LS (GCL), is suitable for landfill base lining, landfill caps and closures, liquid containment, cut off walls, ponds, dams, lagoons, tunnels, animal waste containment and in mining applications.
Features:
• The black woven layer facilitates visual checking of the stitching quality as the liner is being laid.
• Self-healing and self-sealing (try puncturing a rubber or HDPE liner with a waratah and watch it leak. The swelling Sodium Bentonite in SwellSeal® LS will seal around the waratah and prevent loss of water).
• Easy to install. Rolls are overlapped 300mm at edges.
• Rolls manufactured with additional Bentonite granules impregnated 300mm along each edge.
• Production facilities are ISO9001 and CE accredited.
• All products are fully guaranteed by one of the largest textile corporations in China.
• Granulated Bentonite offers Occupational Health and Safety benefits compared to powder Bentonite.
• Our range of GCL is available in grades from 3500g/m2 to 5500g/m2 (with or without a PE membrane bonded to it).
• Available in rolls up to 5.8 m wide.
• Production capacity of 7.5 million m2/year.
• Available NZ wide, supplied direct or as an installed solution.
For more information
|
|
|
|
|
|
|
|
|
| Technical Data | Test Standard | Units | Grade |
| Bentonite | GCL-4500 | ||
| Swell Index | ASTM D-5890 |
ml/2g | >28 |
| Fluid Loss | ASTM D-5891 | ml |
<18 |
| Moisture Content | ASTM D-4643 | % |
<13 |
| Coefficient of Water Absorption | ASTM D-4643 | % |
>600 |
| Geotextiles | |||
| Polyester Cover (non-woven) | ASTM D-5261 | g/m2 |
200 |
| PP Carrier (woven) | ASTM D-5261 | g/m2 |
100 |
| SwellSeal LS Liner (as manufactured)* | |||
| Quality Assurance | ISO 9001; CE Cert |
Yes |
|
| GCL Total Mass | ASTM D-5993 | g/m2 |
>4500 |
| Bentonite Mass | ASTM D-5993 | g/m2 |
>4200 |
| GCL Rupture Intensity Strength | ASTM D-6768 |
kN/m |
>10.4 |
| Grab Strength (MD/TMD) | ASTM D-4632 |
N |
>600/800 |
| CBR Strength | GB/T 14800-1993 |
N |
>1800 |
| CBR Elongation | GB/T 15788-1995 |
% |
>15 |
| Peel Strength | ASTM D-6496 |
N |
>72 |
| Hydraulic conductivity k-value (Permeability) | ASTM D-5887 |
m/s |
<4.5x1012 |
| Width | m |
5.8 |
|
| Length | m |
30 |
|
| Roll size (effective coverage 156m2. Laps 300mm either side = 18m2) | m2 |
174 |
